Adept technology Adept XUSR Guide de l'utilisateur télécharger pdf (Page 80)

Chapter 6: Optional Equipment Installation

Figure 6-10. Removing the Cable Strap Plate

12.

Remove the four screws for the Joint 1 cover and lift the cover up so you have access to

the tubing under the cover. See Figure 6-11.

Figure 6-11. Connecting Spare Air Line to User Connector

13.

Disconnect the tubing from the 6 mm User Air fitting shown in Figure 6-11. Fold the

tubing out of the way and restrain using tie-wraps.

14.

Locate the spare air line contained in the tubing bundle inside the front end of the

cover. Remove the spare air line from the bundle.

15.

Insert the spare air line into the back of the empty 6 mm User Air fitting.

Adept Cobra ePLC600/800 Robot, User’s Guide, Rev A

Page 80 of 108

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 107 108

Pas de commentaire

Adept technology Adept XUSR Guide de l'utilisateur Page 80